Hello, I have a problem I was hoping you guys could help me with: Me and my dad have one Netgear WNR23500Lv2 each, both with Tomato + OpenVPN. The VPN-setup is done 100% from GUI When I try to download a file, I never get more than 500KB/s, so I did a test with VPN on/off: Connected to a FTP with filezilla, stopped the VPN-service in the router, downloaded a file = 2,5MB/s Started the VPN-service in the router, downloaded a new file = 500KB/s With SSH I got the VPN-config-files: SERVER_CONFIG: Automatically generated configuration daemon server 10.8.0.0 255.255.255.0 proto udp port 1194 dev tun21 keepalive 15 60 verb 3 push "route 192.168.10.0 255.255.255.0" client-config-dir ccd client-to-client route 192.168.20.0 255.255.255.0 push "route 192.168.20.0 255.255.255.0" push "dhcp-option DNS 192.168.10.1" ca ca.crt dh dh.pem cert server.crt key server.key status-version 2 status status CLIENT_CONFIG: Automatically generated configuration daemon client dev tun11 proto udp remote xxx.xxx.xxx.xxx 1194 resolv-retry 30 nobind persist-key persist-tun redirect-gateway def1 verb 3 ca ca.crt cert client.crt key client.key status-version 2 status status As far as I know, this seems fine. I did a "top" in SSH, and OpenVPN is using 5%MEM and 0%CPU MEM: 19148K used, 42916K free, 0K shared,...
↧